Horizontal Cladding on Blockwork
*For interior applications, batten centres to be at 600mm centres.
Horizontal Cladding on Studs
*Interior studs spaced at 600mm centres
Exterior studs spaced at 450mm centres
Vertical Cladding on Blockwork
*For interior applications, batten centres to be at 600mm centres.
Vertical Cladding on Studs
*Interior battens spaced at 600mm centres.
Exterior battens spaced at 450mm centres.
Shadowline for Sorrento profile is 5mm
Shadowline for Queenscliff profile is 3mm
External Y Profile
Timber Southern Cross
Aluminium Southern Cross
|Profile||Spotted Gum||Blackbutt||White Oak||Vic Ash|
|Profile||Burnt Ash||Pacific Teak||Banjo Pine|
*All board weights are in Kilograms per square metre.
|Product Name||Sculptform Tongue and Groove Cladding|
|Sequence||138×19, 68×19 Repeating|
|Installation||Strictly in accordance with ‘Sculptform Tongue and Groove Installation Guide’|
Random Length - End matched
Random length end matched cladding boards utilise a method called end matching. This process creates a small tongue and grove on either end of the board to allow for stronger, straighter joins. Random end matched boards come in random lengths over 900mm and are the most cost-effective length option. This option allows for joining off a stud and is ideal for applications where the board length required is over 3-3.6m depending on species selection.
Set Length boards are supplied all over a desired specific length. Different lengths are available for different species so please contact us for more information. This length option is perfect for applications where joins are not desired however the exact measurement is unknown allowing installers to trim on site
Cut to Exact Length
Cut to exact length boards are supplied each to desired specified lengths. This allows for much faster install time and avoids trimming on site. This option is only recommended for projects where exact measurements are known. Please note exact length boards have a tolerance of ± 1mm.
The BIM and CAD files for Sculptform’s Tongue and Groove Cladding including Revit and AutoCad files can be accessed in our downloads section.
All untreated timber achieves a Group 3 rating according to AS 5637:2015. If Group 1 timber is required, wider profile Timber Veneer or Timber-Look Veneer Click-on battens provide a timber aesthetic while achieving a Group 1 rating.
Timber is deemed combustible under AS 1530.1-1994. If your project requires a non-combustible material, Timber-look Veneered Aluminium Click-on battens are a good alternative to solid timber.
For Class 2 and Class 3 buildings, concessions in the NCC allow for timber cladding to be used while remaining fire compliant.
Each timber species achieves different BAL ratings according to AS 3959-2009 as outlined below –
|Timber Species||Bal Rating|
|Burnt Ash||Not Compliant|
|Vic Ash||Not Compliant|
To download fire certificates for our Tongue and Groove Cladding system, visit our downloads section.
Durability is an important factor when using timber externally. Each species of timber falls into one of the following durability classes. These classes relate to above ground durability as per AS 5604: 2005.
|Timber Species||Durability Class – Life Expectancy||Usage|
|Banjo Pine||Class 4 – Less than 7 years||Interior Only|
|Blackbutt||Class 1 – Greater than 40 years||Interior / Exterior|
|Burnt Ash||Class 1 – Greater than 40 years||Interior / Exterior|
|Pacific Teak||Class 1 – Greater than 40 years||Interior / Exterior|
|Spotted Gum||Class 1 – Greater than 40 years||Interior / Exterior|
|Vic Ash||Class 3 – 7 to 15 years||Interior Only|
|White Oak||Class 3 – 7 to 15 years||Interior Only|
Interior timber typically does not need maintenance. It is important to regularly check timber which is exposed to UV radiation through windows etc, as this can lead to yellowing of the coating. Re-coating may be required.
The level of maintenance required on external timber largely depends on the degree of exposure, location, coating selection and desired aesthetic. Sculptform offers the following coating options factory applied as standard –
- Clear Oil (Cutek CD50 Clear Oil)
When timber is not exposed to direct sunlight (for example exterior soffits), Clear oil maintains the timbers natural colour. When timber is exposed to sunlight, using Clear Oil will allow the timber to silver unless additional pigment is used to tint the clear oil. Sculptform recommends re-coating these applications every 12-18 months.
- Enviropro Exterior Coatings
When Enviropro exterior coatings are used on timber which is not exposed to direct sunlight, it typically will not require maintenance. Sculptform still recommends annual inspections to check the integrity of the coating.
Enviropro coatings are designed to maintain timber colour and prevent silvering, even in areas which are exposed to direct sunlight and UV radiation. To keep the timber pristine, Sculptform recommends re-coating every 2-4 years. The rate of coating deterioration varies, so 6 monthly visual inspections should be carried out to identify any deterioration of the coating and areas for re-coating.
Standard end matching can be used with all profiles and performs the role of creating a neat, seamless linear effect. End Matching was designed so boards could be joined off-stud, a time and labour-saving innovation that removes the need for measuring and cutting on the stud. End matching slashes wastage from 10% to less than 5%*, and the design facilitates water run-off when used vertically.
The installation method for end-matching is the same whether the cladding is vertical or horizontal. Quality sealant needs to be applied to gap, then boards are pushed together. Excess sealant to be scraped off once dry.
|Timber Species||FSC®||PEFC® / Responsible Wood®|
|Spotted Gum||Not Available||On Request|
|Blackbutt||Not Available||On Request (selected sizes only)|
|White Oak||On Request||Not Available|
|Vic Ash||Not Available||On Request|
|Burnt Ash||On Request||Not Available|
|Pacific Teak||Not Available||Not Available|
|Banjo Pine||On Request||On Request|
* FSC and PEFC timber may have longer lead times.
Read more about timber certification in our article ‘Why use Sustainable Timber?‘
First ensure the framing is set-up suitably, to allow for curved fixing battens. The centres
of the stud work may have to be reduced excessively, depending on the radius.
With curved walls it’s better to limit the board size to one of smaller width, particularly if
the radius is tight.
Careful attention must be paid to the distance between the opening of
the tongue and groove in external application. When the opening creates waterproofing
concerns, run a sealant down the groove during installation and neatly cut off excess
*Different curve options can be achieved with custom profiles. Contact us at firstname.lastname@example.org to discuss your project requirements.
Window Header Detail
Window Side Detail
Window Base Detail